Canon imagePROGRAF iPF6400 Setup Guide - Page 4

Install the Printheads Install both printheads. 1 When the display screen shows Open Upper Cover, open the top cover. 2 Pull the printhead fixer lever forward all the way to open it completely. 3 Lift the printhead fixer cover to open it fully. 4 Hold the printhead by the grips (a) as you remove it from the pouch. a a 5 Remove the orange protective part (a). To remove the other orange protective part (b), push the grip (c) as you remove it. bc a 6 Insert the printhead into the carriage (b) with the ink holes (a) up and facing the front of the printer as shown in the figure. Carefully push the printhead firmly into the carriage (b), ensuring that the parts that were covered by the protective parts do not touch the carriage (b). a • Never touch the parts covered by the protective parts. Doing so may damage the printhead and affect printing quality. • The printhead contains ink, so be careful not to spill it once the protective parts are removed. • Do not reattach the protective parts after removing them. Dispose of these materials according to local regulations. . 7 Pull the printhead fixer cover down toward the front to lock the printhead in place. 8 Press the printhead fixer lever inwards until it clicks into place. b 9 Repeat steps 2 to 8 to install the second printhead set. Close the top cover. 4