Canon imagePROGRAF iPF785 User Guide - Page 391

iPF785 Paper cutting (to have the roll cut at your specified position) Cutting the Leading Edge of Roll Paper Automatically Handling and Use of Paper Handling rolls 1 Press the Feed button. 2 Press the ▼ button to advance the roll to the position for cutting. 3 Press the Cut button. 4 Press ▲ or ▼ to select Yes, and then press the OK button. After the roll paper is cut, it is rewound automatically. • If paper would be short when cut at a particular position, the roll may automatically be advanced in some Caution cases before cutting. Cutting the Leading Edge of Roll Paper Automatically If the leading edge of the paper is cut crooked or is not cut straight when roll paper is loaded, it will not print correctly. If this happens, you can cut the leading edge of the paper straight when loading a paper roll by using Trim Edge First in the Control Panel menu. Trim Edge First offers the following options. • Automatic If the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the leading edge straight and eject the fragment of paper to prevent printing on the platen and soiling the printer. 391 User's Guide