Canon imagePROGRAF iPF785 User Guide - Page 603

iPF785 6 Holding the new Printhead by the grips (a), remove it from the pouch. Replacing the Printhead Maintenance and Consumables Printheads • When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or metal contacts Important (c). This may damage the Printhead and affect printing quality. • Never touch the ink supply section (d). This may cause printing problems. 7 While firmly holding the Printhead you have removed, use your other hand to remove the orange Protective Part (a). Squeeze the grips (c) of Protective Part (b) and pull it down to remove it. • The inside surface of the Protective Part (a) and Protective Part (b) is coated with ink to protect the nozzles. Important Be careful not to touch these surfaces when removing the caps. • The Printhead contains ink to protect the nozzles. We recommend removing Protective Part (b) as you hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your clothes or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth. • If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing quality. • Do not reattach the removed Protective Part. Dispose of these materials in accordance with local regula- tions. 603 User's Guide