Canon imagePROGRAF iPF785 Basics Guide - Page 108
Printed colors of lines are inaccurate during HP-GL/2 printing
View all Canon imagePROGRAF iPF785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Printed colors of lines are inaccurate during HP-GL/2 printing iPF785 Series Printed colors of lines are inaccurate during HP-GL/2 printing Cause AdjustFaintLines is On in the Control Panel menu. Corrective Action Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected results. However, lines in some colors may appear broken. HP-GL/2 jobs are printed 6 mm larger than specified Cause The page size of the HP-GL/2 print job, as created in the source application, is incorrect. Corrective Action In the Control Panel menu, set Oversize to Off. (See "Menu Settings.") ➔User's Guide HP-GL/2 jobs are printed at maximum size, even if a standard size is specified Cause The page size of the HP-GL/2 print job, as created in the source application, is incorrect. Corrective Action Set Detect img size to Command priority or Detected size in the Control Panel menu. (See "Menu Settings.") ➔User's Guide Set Conserve Paper to On in the Control Panel menu. (See "Menu Settings.") ➔User's Guide HP-GL/2 printing takes a long time Cause Large print jobs with a lot of data take longer to print. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. Corrective Action Please wait a while until printing is finished. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") ➔User's Guide The printer stops when printing a HP-GL/2 job (the carriage stops moving) Cause The printer is analyzing the print job. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. Corrective Action Please wait a while until printing is finished. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") ➔User's Guide Troubleshooting HP-GL/2 problems 108 Basic Guide