Canon imagePROGRAF iPF785 Basics Guide - Page 94
Depression on the leading edge is left, The size of clear film cannot be detected
View all Canon imagePROGRAF iPF785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Depression on the leading edge is left iPF785 Series Depression on the leading edge is left Cause Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge. Corrective Action When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that the paper edge is automatically cut before printing. (See "Menu Structure.") ➔P.51 The size of clear film cannot be detected Cause The Platen is soiled with ink or other substances. Corrective Action Open the Top Cover and clean the entire Platen. (See "Cleaning Inside the Top Cover.") ➔P.42 Roll Paper is Continuously Ejected Cause Although sheets are selected as the paper source, a roll was advanced. Corrective Action After roll ejection stops, follow these steps to reload the roll. 1. Push the Release Lever back. 2. Open the Roll Cover. 3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that both ends of the roll are rewound evenly. 4. Pull the Release Lever forward. 5. Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper". (See "Loading Rolls in the Printer.") ➔P.15 Troubleshooting Problems Regarding Paper 94 Basic Guide