Canon imagePROGRAF iPF785 Basics Guide - Page 118
Regular printing is selected, but a roll is loaded., Paper jam, Paper is crooked., Loose
View all Canon imagePROGRAF iPF785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Regular printing is selected, but a roll is loaded. iPF785 Series Regular printing is selected, but a roll is loaded. Cause A print job for printing on sheets was sent when a roll is loaded. Corrective Action 1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing. 2. After removing the roll, load and print on a sheet of the type and size of paper you have specified in the printer driver. (See "Removing the Roll from the Printer.") ➔P.18 (See "Loading and Printing on Sheets.") ➔User's Guide Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing. Paper jam Cause A paper jam occurred in the printer during printing. Corrective Action For roll paper, cut the paper on the upper side of the {Paper Feed Slot. 1. Push the Release Lever back and remove the jammed paper. (See "Clearing Jammed Roll Paper.") ➔P.85 (See "Clearing a Jammed Sheet.") ➔P.88 2. Load the paper. (See "Loading Rolls in the Printer.") ➔P.15 (See "Loading Sheets in the Printer.") ➔P.21 3. Pull the Release Lever forward. 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Error Message Messages regarding paper Paper is crooked. Cause Corrective Action Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll. 1. Push the Release Lever back. 2. Adjust the right edge of the roll to make it parallel to the orange Paper Alignment Line. 3. Pull the Release Lever forward. (See "Loading Rolls in the Printer.") ➔P.15 If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until it touches the Roll Holder flange, and reload the Roll Holder in the printer. (See "Attaching the Roll Holder to Rolls.") ➔P.12 Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Pull out the sheet. 3. Pull the Release Lever forward. 4. Reload the sheet, aligning it with the guide on the right. (See "Loading Sheets in the Printer.") ➔P.21 • To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be- 118 Important cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed. Basic Guide