Casio EX FH20 Owners Manual - Page 72

8. Use [4] and [6] to select the subject movement sensitivity, and then press [SET]. • You can select any one of three sensitivity levels: "High", "Normal", or "Low". • Move Out CS Setting Guide High: For a subject that moves out of the boundary quickly Low : For a subject that moves out of the boundary slowly • Move In CS Setting Guide High: For a subject that moves into the boundary quickly or for a small subject (relative to the boundary) Low : For a subject that moves into the boundary slowly or for a large subject (relative to the boundary) 9. Use [8] and [2] to select the second control panel option from the bottom (High-speed CS fps). 10. Use [4] and [6] to select the CS speed setting you want, and then press [SET]. • You select a value in the range of 1 frame per second to 40 frames per second for the CS speed. CS speed 11. Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time). 12. Use [4] and [6] to specify the pre-record time, which is the amount of time before and after subject movement for which you want to record images, and then press [SET]. Number of pre-recorded images and recording time Auto shutter point Number of real-time recorded images and recording time • The approximate number of recordable CS images will appear on the monitor screen. • The "Number of pre-recorded images and recording time" cannot be set to zero. Number of recordable CS images Remaining snapshot memory capacity B 72 Using BEST SHOT