Chicco 00060796430070 User Guide - Page 8

LATCH REMOVAL & STORAGE This Child Restraint can be safely installed using vehicle belts or LATCH. LATCH is a Child Restraint attachment system that is standard in most vehicles manufactured after September 1, 2002. Refer to your vehicle owner's manual for details regarding LATCH use in your vehicle. Removing LATCH: 1 1 Pull LATCH Connectors out of storage pockets while lifting up on LATCH Release Lever. Storing LATCH: 2 2 Insert LATCH Connectors into storage pockets. 3 Pull LATCH Pull Strap to secure LATCH Connectors. 3 4 Roll LATCH Pull Strap and store in Pull Strap Storage Pocket. 4 When not using LATCH, the LATCH Connectors and Pull Strap MUST be stored properly to allow Carrier to attach securely to Base. 14 SHOULDER BELT LOCKOFF The Shoulder Belt Lockoff is used when installing the Base using your vehicle belts. It locks the vehicle shoulder belt in place, ensuring a stable, secure Base installation. 1 Do not put the shoulder belt 1 in the locked mode. 2 With vehicle belt tight, position the shoulder belt under the Shoulder Belt Lockoff that is on the opposite side of the buckle. 3 Firmly slide shoulder belt into the lockoff. (Optional: Once 2 3 the base is installed tightly, the shoulder belt can be put in the locked mode. See vehicle owner's manual or label on seat belt for more information.) Refer to "Installation Using Vehicle Belt" on page 32 for detailed installation instructions. 15