Cisco AIR-AP1010 Quick Start Guide - Page 30

Appendix A Planning Notes External Antennas The AIR-AP1020-A-K9, AIR-AP1020-E-K9, AIR-AP1020-J-K9, AIR-AP1030-A-K9, AIR-AP1030-E-K9, and AIR-AP1030-J-K9 Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access points can be used with external antennas with the following characteristics: • 5 GHz patch antenna: 6 dBi net gain. • 2.4 GHz patch antenna: 6 dBi net gain. Deployment Statement This product is certified for indoor deployment only. Do not install or use this product outdoors. EU Regulatory Information Compliance Information for Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access points: 1. Standards met: - Radio: EN 301 328, EN 301 893 - EMC: EN 301489-1, EN 301 489-17 - Safety: EN 60950 - RF Safety: EN 50371 2. CE Marking: Cisco Aironet 1000 Series 802.11a/b/g lightweight access points are identified with this CE marker: 3. EU Country Restriction: Note • The Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access point is intended for indoor use only. • The Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access point meets EU DFS requirement. Generally, the 5150-5350 MHz, 5470-5750 MHz, and 2400-2483.5 MHz bands are allowed in most EU countries. However, there are several country specific restrictions that apply to different bands on a country-by-country basis. The following entries specify countries with specific restrictions: Note These restrictions may evolve. It is recommended that you check with their local authorities for latest requirements • Austria - Only transmission within the frequency band 5150-5250 MHz is allowed. The band 5470-5750 MHz is not allowed. • Belgium - The frequency band 5470-5750 MHz is not allowed. AP1010 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with Internal Antennas - Quick Start Guide A-4 78-17146-01