Home » Cisco Manuals » Bridges & Routers » Cisco SE2800 » Manual Viewer

Cisco SE2800 Quick Start Guide - Page 11

Statement 1 - switch

Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017 Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029 11

Section	Page
Cisco 2800 Series Integrated Services Routers Quick Start Guide	1
1 Cisco 90-Day Limited Hardware Warranty Terms	2
2 Overview	3
3 Documents, Equipment, and Tools	5
User Documentation	5
Translated Versions	5
Items Included with Cisco 2801 Routers	5
Items Included with Cisco 2811, Cisco 2821, and Cisco 2851 Routers	6
Items Not Included	6
4 Install Chassis	6
Safety Information	6
Warning Definition	7
Installing the Router	12
Rack-Mounting the Router	13
Wall-Mounting the Router-Cisco 2811 Routers Only	16
Installing the Router on a Desktop	17
Grounding the Chassis	17
5 Connect Cables	19
Power Connections	20
Connecting the Router to AC Power	20
Connecting the Router to DC Power	21
Connecting the Router to Backup Power	26
WAN, LAN, and Voice Connections	26
System Management Connections	28
6 Power Up the Router	28
Checklist for Power-Up	28
Power-Up Procedure	29
Verify the Front Panel LED Indications	30
Verify the Hardware Configuration	30
7 Interface Numbering	30
8 Perform Initial Configuration	32
Initial Configuration Using Cisco Router and Security Device Manager (SDM)	32
Initial Configuration Using the Setup Command Facility	33
Initial Configuration Using the Cisco CLI-Manual Configuration	35
Verify the Initial Configuration	36
9 Where to Go Next	36
10 Obtaining Documentation	37
Cisco.com	37
Product Documentation DVD	37
Ordering Documentation	37
11 Documentation Feedback	38
12 Cisco Product Security Overview	38
Reporting Security Problems in Cisco Products	38
13 Obtaining Technical Assistance	39
Cisco Technical Support & Documentation Website	39
Submitting a Service Request	39
Definitions of Service Request Severity	39

Match case Limit results 1 per page

Warning

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.

Statement 1

Warning

Read the installation instructions before connecting the system to the power source.

Statement 1004

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only

through the use of a special tool, lock and key, or other means of security.

Statement 1017

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages

and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other

equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards,

faceplates, front covers, and rear covers are in place.

Statement 1029