Cisco SE2800 Quick Start Guide - Page 19
Connect Cables
View all Cisco SE2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Figure 16 NEBS-Compliant Chassis Ground Connection on Cisco 2821 or Cisco 2851 Chassis A F A= ACT SF=ES0P/E1ED A= FDX A= LINK FE 0/0 A S L F S PVDM2 PVDM1 PVDM0 AIM1 L AIM0 98807 Ground lug Figure 17 Chassis Ground Connection Using Ring Terminal on Cisco 2821 or Cisco 2851 Chassis A F A= ACT SF=ES0P/E1ED A= FDX A= LINK FE 0/0 S A L F S PVDM2 PVDM1 PVDM0 AIM1 L AIM0 103065 Ring terminal attachment 5 Connect Cables Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Warning The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact. Do not attempt to tamper with or open any public telephone operator (PTO)-provided equipment or connection hardware. Any hardwired connection (other than by a nonremovable, connect-one-time-only plug) must be made only by PTO staff or suitably trained engineers. Statement 23 Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017 Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 19