Cisco SE2800 Quick Start Guide - Page 31

Slot Number, Slot Type, Interface Numbering Range, Port Location, Examples

Page 31 highlights

Table 6 Interface Numbering on Cisco 2801 Series Routers Slot Number Slot Type Interface Numbering Range Onboard ports Fast Ethernet 0/0 and 0/1 0 VIC/VWIC (voice only-no PRI support) 0/0/0 to 0/0/3 1 HWIC/WIC/VIC/VWIC1 0/1/0 to 0/1/3 (single-wide HWIC) 0/1/0 to 0/1/8 (double-wide HWIC) 2 WIC/VIC/VWIC1 0/2/0 to 0/2/3 3 HWIC/WIC/VIC/VWIC1 0/3/0 to 0/3/3 (single-wide HWIC) 0/3/0 to 0/3/8 (double-wide HWIC) 1. A VWIC in slots 1, 2, and 3 can operate in both data and voice mode; in slot 0, a VWIC can operate only in voice mode. Note On the Cisco 2801 router, the numbering format for configuring an asynchronous interface is 0/slot/port. To configure the line associated with an asynchronous interface, simply use the interface number to specify the asynchronous line. For example, line 0/1/0 specifies the line associated with interface serial 0/1/0 on a WIC-2A/S in slot 1. Similarly, line 0/2/1 specifies the line associated with interface async 0/2/1 on a WIC-2AM in slot 2. Table 7 Interface Numbering on Cisco 2811, Cisco 2821, and Cisco 2851 Series Integrated Services Routers Port Location Interface Numbering Scheme Examples1, 2 Built into the chassis front panel Interface-type port usb 0 usb 1 Built into the chassis rear panel Interface-type 0 / port In an interface card (HWIC, HWIC-D, WIC, VWIC, VIC) plugged directly into an HWIC slot in a chassis Interface-type 0 / interface-card-slot3 / port Note Interface card slots built into the chassis are labeled HWIC slot-number on Cisco 2800 series routers. In an interface card (WIC, VWIC, Interface-type 15 / interface-card-slot / port VIC) plugged into a slot in a network module Built into a network module (NME, Interface-type 15 / port NME-X, NMD, NME-XD) FXS or FXO port in an extension voice module (EVM) Interface-type 26 / 07 / port FXS/DID port numbers 0 to 7 are built into the EVM. interface fa 0/x interface gi 0/x interface serial 0/x/y interface async 0/x/y line 0/x/y4 interface fa 0/x/y voice-port 0/x/y controller t1 1/x/y voice-port 1/x/y interface serial 1/x/y interface async 1/x/y line 1/x/y4 interface gi 1/x interface serial 1/x interface async 1/x line 1/x4 voice-port 2/0/x FXS/FXO port numbers 8 to 15 are in expansion module 0. Voice port in a BRI expansion module (internal slot) in an extension voice module (EVM) BRI interface in a BRI expansion module (internal slot) in an extension voice module (EVM) FXS/FXO port numbers 16 to 23 are in expansion module 1. Interface-type 26 / 07 / port voice-port 2/0/x Port numbers are 8 to 11 in expansion module 0. Port numbers are 16 to 19 in expansion module 1. Interface-type 26 / port interface bri 2/x Port numbers are 0 to 3 if one expansion module is installed. Port numbers are 0 to 7 if two expansion modules are installed. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

31
Table 6
Interface Numbering on Cisco 2801 Series Routers
Slot Number
Slot Type
Interface Numbering Range
Onboard ports
Fast Ethernet
0/0 and 0/1
0
VIC/VWIC (voice only—no PRI support)
0/0/0 to 0/0/3
1
HWIC/WIC/VIC/VWIC
1
0/1/0 to 0/1/3 (single-wide HWIC)
0/1/0 to 0/1/8 (double-wide HWIC)
2
WIC/VIC/VWIC
1
0/2/0 to 0/2/3
3
HWIC/WIC/VIC/VWIC
1
0/3/0 to 0/3/3 (single-wide HWIC)
0/3/0 to 0/3/8 (double-wide HWIC)
1.
A VWIC in slots 1, 2, and 3 can operate in both data and voice mode; in slot 0, a VWIC can operate only in voice mode.
Note
On the Cisco 2801 router, the numbering format for configuring an asynchronous interface is
0/slot
/
port
.
To configure the
line associated with an asynchronous interface, simply use the interface number to specify the asynchronous line. For example,
line 0/1/0 specifies the line associated with interface serial 0/1/0 on a WIC-2A/S in slot 1. Similarly, line 0/2/1 specifies the line
associated with interface async 0/2/1 on a WIC-2AM in slot 2.
Table 7
Interface Numbering on Cisco 2811, Cisco 2821, and Cisco 2851 Series Integrated Services Routers
Port Location
Interface Numbering Scheme
Examples
1
,
2
Built into the chassis front panel
Interface-type port
usb 0
usb 1
Built into the chassis rear panel
Interface-type
0
/
port
interface fa 0/x
interface gi 0/x
In an interface card (HWIC,
HWIC-D, WIC, VWIC, VIC)
plugged directly into an HWIC slot
in a chassis
Interface-type
0
/
interface-card-slot
3
/
port
Note
Interface card slots built into the chassis are labeled
HWIC
slot-number
on
Cisco 2800 series routers
.
interface serial 0/x/y
interface async 0/x/y
line 0/x/y
4
interface fa 0/x/y
voice-port 0/x/y
In an interface card (WIC, VWIC,
VIC) plugged into a slot in a network
module
Interface-type
1
5
/
interface-card-slot
/
port
controller t1 1/x/y
voice-port 1/x/y
interface serial 1/x/y
interface async 1/x/y
line 1/x/y
4
Built into a network module (NME,
NME-X, NMD, NME-XD)
Interface-type
1
5
/
port
interface gi 1/x
interface serial 1/x
interface async 1/x
line 1/x
4
FXS or FXO port in an extension
voice module (EVM)
Interface-type
2
6
/
0
7
/
port
FXS/DID port numbers 0 to 7 are built into the EVM.
FXS/FXO port numbers 8 to 15 are in expansion module 0.
FXS/FXO port numbers 16 to 23 are in expansion module 1.
voice-port 2/0/x
Voice port in a BRI expansion
module (internal slot) in an
extension voice module (EVM)
Interface-type
2
6
/
0
7
/
port
Port numbers are 8 to 11 in expansion module 0.
Port numbers are 16 to 19 in expansion module 1.
voice-port 2/0/x
BRI interface in a BRI expansion
module (internal slot) in an
extension voice module (EVM)
Interface-type
2
6
/
port
Port numbers are 0 to 3 if one expansion module is installed.
Port numbers are 0 to 7 if two expansion modules are installed.
interface bri 2/x