Cisco SPA2102-SF Administration Guide - Page 112

ATA Routing Field Reference Application page A Router tab > LAN Setup page > LAN Networking Settings section Use these network settings when using NAT. LAN IP Address IP address of the ATA device on the LAN side. LAN Subnet Mask IP address for subnet mask. Enable DHCP Server The status of the DHCP server where Yes is enabled and No is disabled. DHCP Lease Time Provided by the DHCP Server. IP renewal process begins when the time expires. DHCP Client Starting IP Initial IP address the DHCP Server provides for PCs Address attached to the LAN port. Number of Client IP Addresses Number IP addresses available for the DHCP Server to provide. Router tab > LAN Setup page > Static DHCP Lease Settings section Use these settings when using a static IP address. Enable Host Mac Address Host IP Address Options are Yes or No. Default is No. The device's MAC address The device's IP address Application page You can use the Application page to view the port forward settings and to update the DMZ settings, multicast passthru setting, and system reserved ports range. This page includes the following sections: • "Port Forwarding Settings section," on page 113 • "DMZ Settings section," on page 113 • "Miscellaneous Settings section," on page 114 Cisco Small Business ATA Administration Guide 112