Cisco SPA501G Administration Guide - Page 205

Configuring Dial Plans Editing Dial Plans on the IP Phone 8 Editing Dial Plans on the IP Phone You can edit dial plans and modify the control timers. To edit the dial plans on the IP phone: STEP 1 Navigate to Admin Login > advanced > Voice. STEP 2 Click the Ext N tab, where N is the extension being configured. STEP 3 In the Dial Plan section, enter the digit sequences in the Dial Plan field. For more information and examples, see Digit Sequences. The default (US-based) system-wide dial plan appears automatically in the field. You can delete digit sequences, add digit sequences, or replace the entire dial plan with a new dial plan. For more information and examples, see Digit Sequences. Separate each digit sequence with a pipe character, and enclose the entire set of digit sequences within parentheses. Refer to the following example: (9,8[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx) STEP 4 (Optional) Enter the Caller ID Map-Inbound caller ID numbers can be mapped to a different string. For example, a number that begins with +44xxxxxx can be mapped to 0xxxxxx. This feature has the same syntax as the Dial Plan parameter. With this parameter, you can specify how to map a caller ID number for display on screen and recorded into call logs. (Not applicable to Cisco WIP310.) STEP 5 (Optional) Enable IP dialing-Enable or disable IP dialing. Defaults to no. STEP 6 (Optional) Emergency Number-Enter a comma-separated list of emergency numbers. When one of these numbers is dialed, the unit disables processing of CONF, HOLD, and other similar softkeys or buttons to avoid accidentally putting the current call on hold. The phone also disables hook flash event handling. Only the far end can terminate an emergency call. The phone is restored to normal after the call is terminated and the phone is back on-hook. Maximum number length is 63 characters. Defaults to blank (no emergency number). (Not applicable to Cisco WIP310.) STEP 7 Click Submit All Changes. The phone reboots. STEP 8 If you need to configure a dial plan for any other extensions on the phone (depending on the model), click the appropriate Extension tab, enter the dial plan, and submit the changes. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 204