Cisco SPA501G Administration Guide - Page 70
Configuring On-Demand Ring Tones (Cisco SPA525G or Cisco SPA525G2), Installed, Admin Login, advanced
View all Cisco SPA501G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Customizing Standard Features Configuring Ring Tones 3 n=warble;w=file://Warble.raw;c=1 You can also download one of two available ring tones (user ring tone 1 or 2) by using TFTP: http://phone_ip_addr/ringtone1?[url] The [url] syntax is tftp://host[:port]/path. • The default host is the TFTP host. • Port is optional. The default port is 69. • The link is case sensitive. On the IP phones, user-downloaded ring tones are labeled User 1 and User 2 in the choices for the Default Ring. On the phone ring tone menu, the User 1 and User 2 choices are replaced by the corresponding name of the ring tone. Not Installed appears if the user ring tone slots are not used. For ring tone User 1 and User 2, the cadence is fixed with the on-time equals to the duration of the ring tone file and off-time equals to four seconds. The total ring duration is fixed at 60 seconds. The user ring tone names displayed on the IP phone screen are derived from the ring tone file header file. The phone does not require rebooting after downloading a ring tone. To remove the User 1 ring tone from the phone, set the path to delete, as follows: http://phone_ip_addr/ringtone1?/delete STEP 2 Click Submit All Changes. Configuring On-Demand Ring Tones (Cisco SPA525G or Cisco SPA525G2) The Cisco SPA525G or Cisco SPA525G2 support on-demand ring tones; ring tones are downloaded from a TFTP server and played when a call comes in. To configure: STEP 1 Click Admin Login > advanced > Voice > Phone. STEP 2 Scroll to the Ring Tone section. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 69