Cisco WAP4400N User Guide - Page 34
The Administration - Management Tab - default username password
UPC - 745883574858
View all Cisco WAP4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Wireless-N Access Point with Power Over Ethernet The Administration - Management Tab On this screen you can configure the password, Web Access, and SNMP settings. Management You should change the username/password that controls access to the Access Point's Web-based Utility to prevent unauthorized access. Local AP Password User Name. Modify the administrator user name. The default is admin. AP Password. Modify the administrator password for the Access Point's Web-based Utility. The default is admin. Re-enter to confirm. To confirm the new password, enter it again in this field. Web Access To increase the security on accessing the Web-based Utility, you can enable HTTPS. Once enabled, users need to use https:// when accessing the Web-based Utility. Web HTTPS Access. The default is Disabled. Wireless Web Access. Allow or deny wireless clients to access Web based Utility. The default is Enabled. Figure 6-18: Administration - Management SNMP SNMP is a popular network monitoring and management protocol. It provides network administrators with the ability to monitor the status of the Access Point and receive notification of any critical events as they occur on the Access Point. To enable the SNMP support feature, select Enabled. Otherwise, select Disabled. The default is Disabled. Chapter 6: Configuring the Wireless-N Access Point 28 The Administration - Management Tab