Cisco WRP400-G1 Administration Guide - Page 159

WRP400 Provisioning Reference C Feature/XML Tag LAN DHCP Switch Rate Parameters Examples dhcp_lease,dhcp_defa To set the client lease time: ult_lease dhcp_default_lease=888 dhcp_lease: Client lease time in minutes; numerals from 1 to 9999 dhcp_default_lease: Default lease time in minutes; numerals from 1 to 9999 To set lease time and default lease time: dhcp_lease=777,dhcp_ default_lease=888 NOTE: Dhcp_default_lease allows the Service Provider to configure the length of the "default lease time." By default, the client lease time is set to "0," meaning 1 day. mv_switch_total_rate_li mit,mv_switch_ingress_mcast_rate mv_switch_total_rate_limit: Limits the switch throughput; numerals from 1 to 200 (default is 4) To set the switch rate limit to 40 Mbps and the multicast rate to 40 Mbps: mv_switch_total_rate_ limit=5,mv_switch_ingress_mcast_rate=40 mv_switch_ingress_mcast_rate: Ingress multicast rate in Mbps; numerals from 1 to 100 (default is 80) NOTE: The switch rate is set by dividing 200 by the mv_swtich_total_rate_limit. With the default value of 4, the throughput is limited to 50Mbps. MPORTANT: It is highly recommended to keep the default switch rate settings. Default settings hae been tested to support the appropriate Quality of Service for the IPTV video transmission towards the et-top box, in addition to maintaining the appropriate Quality of Service of the Voice Telephony transmission. Cisco Small Business WRP400 Administration Guide 157