Cisco WS-C2960-24TT-L Software Guide - Page 286
Step 14, Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide,
View all Cisco WS-C2960-24TT-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Recovery Procedures Chapter 9 Troubleshooting Step 14 Enter the IP address of the default gateway, and press Return. IP address of the default gateway: ip_address Step 15 Enter a host name for the switch, and press Return. Note On a command switch, the host name is limited to 28 characters; on a member switch to 31 characters. Do not use -n, where n is a number, as the last character in a host name for any switch. Enter a host name: host_name Step 16 Enter the password of the failed command switch, and press Return. Note The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows spaces, but ignores leading spaces. Enter enable secret: secret_password Step 17 Enter Y to enter a Telnet password: Would you like to configure a Telnet password? [yes] y Note The password can be from 1 to 25 alphanumeric characters, is case sensitive, allows spaces, but ignores leading spaces. Step 18 Enter the Telnet password, and press Return: Enter Telnet password: telnet_password Step 19 Enter Y to configure the switch as the cluster command switch. Enter N to configure it as a member switch or as a standalone switch. Note If you enter N, the switch appears as a candidate switch in Cluster Builder. In this case, the message in Step 20 does not appear. Would you like to enable as a cluster command switch? y Step 20 Assign a name to the cluster, and press Return. Enter cluster name: cls_name Note The cluster name can be 1 to 31 alphanumeric characters, dashes, or underscores. Step 21 The initial configuration is displayed: The following configuration command script was created: ip subnet-zero interface VLAN1 ip address 172.20.153.36 255.255.255.0 ip default-gateway 172.20.153.01 hostname host_name enable secret 5 $1$M3pS$cXtAlkyR3/6Cn8/ line vty 0 15 password telnet_password 9-20 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 78-6511-08