Cisco WS-C6509-V-E User Guide - Page 196
ATM/T3 Tab, ATM Area - cm
View all Cisco WS-C6509-V-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
C6576M ATM T3 Interface Dialog Box Chapter 5 Physical Object Dialog Boxes ATM/T3 Tab Figure 5-42 shows the ATM/T3 tab of the C6576M ATM T3 Interface dialog box. Figure 5-42 ATM/T3 Tab of the C6576M ATM T3 Interface Dialog Box ATM Area The ATM area contains the following information: • NSAP Address-Unique identifier of node in ATM network. This address is required if not implemented by ATM CM. • End-Station ID-End-station ID of node in ATM network. The NSAP address prefix is provided by the switch to the router through ILMI. There must be a PVC configured for ILMI communication with the switch. This address is required if not implemented by ATM CM. 5-82 Cisco 6500/7600 Series Manager User Guide
5-82
Cisco 6500/7600 Series Manager User Guide
Chapter 5
Physical Object Dialog Boxes
C6576M ATM T3 Interface Dialog Box
ATM/T3 Tab
Figure 5-42
shows the ATM/T3 tab of the C6576M ATM T3 Interface dialog box.
Figure 5-42
ATM/T3 Tab of the C6576M ATM T3 Interface Dialog Box
ATM Area
The ATM area contains the following information:
•
NSAP Address—Unique identifier of node in ATM network. This address is required if not
implemented by ATM CM.
•
End-Station ID—End-station ID of node in ATM network. The NSAP address prefix is provided by
the switch to the router through ILMI. There must be a PVC configured for ILMI communication
with the switch. This address is required if not implemented by ATM CM.