Cisco WS-C6509-V-E User Guide - Page 371
Network Tab
View all Cisco WS-C6509-V-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Chapter 6 Logical Object Dialog Boxes C6576M OSPF Dialog Box - nssa-Similar to a stub area but autonomous system external routes can be imported into the area. • Auth. Type-Authentication type for the area. The authentication type must be the same for all routers and access servers in an area. The authentication password for all OSPF routers on a network must be the same if they are to communicate with each other using OSPF. The Authentication type has the following values: - none-The area does not enforce any authentication. - simple-Simple password authentication is used. - md5-MD5 authentication is enabled for the area. • Def. Cost-Default cost for the area. Use this value only on an area border router attached to a stub area. It provides a metric for the summary default route generated by the area border router into the stub area. • NSSA Def. Info. Orig.-Generates a Type 7 default into the NSSA area. This argument takes effect only on an NSSA area border router or an NSSA AS border router. • NSSA No Redistrib.-Used when the router is a NSSA area border router and routes are to be imported only into the normal areas, but not into the NSSA area. • Stub No Summary-Indicates that an area border router is sending summary link advertisements into the stub area. • Remove Area-Removes an explicit NSSA or stub area configuration to the OSPF routing process. The action can only be used on an area border router attached to a stub or NSSA area. Network Tab Figure 6-65 shows the Network tab of the C6576M OSPF dialog box. Figure 6-65 Network Tab of the C6576M OSPF Dialog Box Cisco 6500/7600 Series Manager User Guide 6-81