Cisco WS-F6700-DFC3CXL Hardware Guide - Page 36

Supported Hardware Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR Product ID Power (append "=" for spares) Required Note Product Description DWDM-SFP-4931= DWDM-SFP-5332= DWDM-SFP-5736= DWDM-SFP-6141= Minimum Software Version 12.2(33)SRE1 12.2(33)SRE1 12.2(33)SRE1 12.2(33)SRE1 • WS-X6748-SFP requires one of the following: - WS-F6700-DFC3BXL (3.30 A@42 V) - WS-F6700-DFC3B (3.00 A@42 V) - WS-X6700-CFC (0.75 A@42 V) • WS-X6748-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B. • WS-X6748-SFP is supported in the WS-C6503-E chassis. • WS-X6748-SFP is not supported in the WS-C6503 and CISCO7603 chassis. • In a 13-slot chassis, WS-X6748-SFP is supported only in slots 9 through 13 and does not power up in other slots. • On WS-X6748-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-SFP ports that interconnect network devices. • See the "Small Form-Factor Pluggable Modules (SFPs)" section on page 42. WS-X6724-SFP 2.23 A@42 V 24-port Gigabit Ethernet SFP • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V) • Supports egress multicast replication • QoS architecture: - With DFC3: 2q8t/1p3q8t - With CFC: 1q8t/1p3q8t • Number of ports: 24 Number of port groups: 2 Port ranges per port group: 1-12, 13-24 Supported only with Supervisor Engine 720. 12.2(33)SRA Supported with RSP720-1GE 12.2(33)SRB Supported with RSP720-10GE 12.2(33)SRC SFPs Supported GLC-T= 12.2(33)SRA GLC-SX-MM= 12.2(33)SRA GLC-LH-SM= 12.2(33)SRA GLC-ZX-SM= 12.2(33)SRA GLC-BX-D= 12.2(33)SRA Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S 36 OL-10362-13