Cisco WS-F6700-DFC3CXL Hardware Guide - Page 47
/100/1000 Ethernet Switching Modules
UPC - 882658073236
View all Cisco WS-F6700-DFC3CXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR Supported Hardware Product ID Power (append "=" for spares) Required WS-F6K-VPWR None Product Description Minimum Software Version PoE daughtercard for WS-X6348-RJ-45, WS-X6348-RJ-21V, WS-X6148-RJ-45, and WS-X6148-RJ-21 With Supervisor Engine 720 12.2(33)SRA 10/100/1000 Ethernet Switching Modules Product ID Power (append "=" for spares) Required Product Description WS-X6748-GE-TX 7.00 A@42 V 48-port 10/100/1000 RJ-45 Minimum Software Version • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V) • Supports egress multicast replication • QoS architecture: - With DFC3: 2q8t/1p3q8t - With CFC: 1q8t/1p3q8t • Number of ports: 48 Number of port groups: 4 Port ranges per port group: 1-12, 13-24, 25-36, 37-48 Supported with Supervisor Engine 720 12.2(33)SRA Supported with RSP 720-1GE 12.2(33)SRB Supported with RSP 720-10GE 12.2(33)SRC Note • WS-X6748-GE-TX requires one of the following: - WS-F6700-DFC3BXL (3.30 A@42 V) - WS-F6700-DFC3B (3.00 A@42 V) - WS-X6700-CFC (0.75 A@42 V) • WS-X6748-GE-TX ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B. • WS-X6748-GE-TX is supported in the WS-C6503-E chassis. • WS-X6748-GE-TX is not supported in the WS-C6503 and CISCO7603 chassis. • In a 13-slot chassis, WS-X6748-GE-TX is supported only in slots 9 through 13 and does not power up in other slots. • On WS-X6748-GE-TX ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-GE-TX ports that interconnect network devices. OL-10362-13 Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S 47