Cisco WS-F6700-DFC3CXL Hardware Guide - Page 68

Supported Hardware Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR Product ID (append "=" for spares) SIP Support Product Description ONS-SC-155-EL SFP-OC3-LR1 SPA-4XT-Serial SPA 7600-SIP-200 4-Port Serial Interface SPA Circuit Emulation over Packet (CEoP) SPAs Minimum Software Version 12.2(33)SRD2 12.2(33)SRD2 12.2(33)SRC1 Product ID (append "=" for spares) SIP Support Product Description Minimum Software Version SPA-2CHT3-CE-ATM 7600-SIP-400 2-Port Channelized T3/E3 ATM CEoP SPA 12.2(33)SRC Note The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel. SPA-1CHOC3-CE-ATM 7600-SIP-400 1-Port Channelized OC-3 STM1 ATM CEoP SPA 12.2(33)SRB SFP Modules Supported in SPA-1XCHOC3-CE SFP-OC3-MM 12.2(33)SRB SFP-OC3-IR1 12.2(33)SRB SFP-OC3-LR1 12.2(33)SRB SFP-OC3-LR2 12.2(33)SRB SFP-OC3-SR 12.2(33)SRB ONS-SC-155-EL 12.2(33)SRD2 SPA-24CHT1-CE-ATM 7600-SIP-400 24-Port Channelized T1/E1/J1 ATM CEoP SPA 12.2(33)SRB Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel. Services SPA Carrier (SSC) Product ID Power (append "=" for spares) Required Product Description 7600-SSC-400 5.43 A@42 V Services SPA Carrier (SSC) Note Minimum Software Version 12.2(33)SRA • 7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs. • ES20 and ES+ cards are compatible with 7600-SSC-400 and SPA-IPSEC-2G and it's supported only from Cisco IOS Release 12.2(33)SRE release onwards. • RSP720-3C-10GE/RSP720-3CXL-10GE supports the 7600-SSC-400 from Cisco IOS Release 12.2(33)SRE onwards. • Supervisor Engine 720 and Supervisor Engine 32 support the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRA . • Route Switch Processor 720-1GE supports the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRC . Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S 68 OL-10362-13