Cisco WUSB600N User Guide - Page 11
Wi-Fi Protected Setup, Passphrase, Push Button Recommended, Use Adapter's PIN number - linksys
View all Cisco WUSB600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 3 Passphrase Enter the network's Passphrase (also called a pre-shared key) of 8-63 characters. To connect to the network, click Connect. To cancel the connection, click Cancel. WEP (Wired Equivalent Privacy) If the network uses WEP encryption, then the WEP Key or Passphrase Needed for Connection screen appears. Advanced Configuration 2. Click Finish. WEP Security Passphrase Enter the Passphrase or WEP key. The passphrase is case-sensitive and must be 16 or fewer alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (For non-Linksys wireless products, enter the WEP key manually.) If you enter the network's WEP key, enter the appropriate number of hexadecimal characters ("0" to "9" and "A" to "F"). For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128‑bit encryption, enter exactly 26 hexadecimal characters. To connect to the network, click Connect. To cancel the connection, click Cancel. Dual-Band Wireless-N USB Network Adapter Congratulations Congratulations! The Adapter is connected to the network. Wi-Fi Protected Setup If you connect to a router that supports Wi-Fi Protected Setup, then you will view this screen: Select a Method Before you begin, make sure the router and the computer with the Adapter are in the same room. Then select the method that is most convenient for you. Push Button (Recommended) Select this option to use the push button method. Use Adapter's PIN number Select this option to enter the Adapter's PIN number on the router. Enter Key Manually Select this option to manually enter the security key. Click Next to continue, or click Back to return to the previous screen. Proceed to the instructions for the method you selected.