Cisco WUSB600N User Guide - Page 13
Enter Key Manually
View all Cisco WUSB600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 3 3. On the Adapter's PIN number screen, click Next. Advanced Configuration Congratulations! The Adapter is connected to the network. Enter Key Manually Proceed to the appropriate section, "Wireless Security Disabled" or "Wireless Security Enabled". Wireless Security Disabled If you connect to a network whose wireless security is disabled, then you will view this screen: Enter the PIN Number 4. The Adapter connects to the network. Click Connect Anyway 1. Click Connect Anyway. 2. Click Finish. Connecting to the Network 5. Click Print to print out your wireless network settings. Then click Finish to return to the Status screen, or click Exit to exit the Monitor. Congratulations Congratulations! The Adapter is connected to the network. Wireless Security Enabled If you connect to a network whose wireless security is enabled, then you will view one of three screens. Congratulations Dual-Band Wireless-N USB Network Adapter 10