Cobra CXT 1035R FLT CXT 1035R FLT - Page 12

ESC Operation Mode Functions Introduction Operation Customer Assistance Warranty CHANNEL VOLUME Privacy Code Scan • Your microTALK radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time. Scan Button M C MEM ESC TRI WATCH SCAN TRI WATCH SCAN Channel Button To scan 1. While privacy codes: in Standby mode, press and release the CALL Scan button twice (CTCSS) or three times (DCS) until the CTCSS or DCS icon and numbers are flashing. 2. Press and hold the Scan button to begin scanning privacy codes within the selected channel. NOAA* All Hazards Radio Channels • You can use your microTALK radio to listen to NOAA All Hazards Weather Radio channels transmitting in your area. Weather Button To listen to All Hazards Radio channels: MODE Hazards Radio Icon 1. Press the Weather button until the All Hazards Radio icon and the currently selected All Hazards Radio channel are displayed. 2. Use the Channel Up or Channel Down button to change All Hazards Radio channels. MEM ESC TRI WATCH SCAN 3. The All Hazards Radio icon will continue to be displayed when All Hazards Radio is on. CHANNEL CHANNEL E CALL RX Vox Select MODE CHhIaMnEnDelLO WX TW DCS Scan Vox CTCSS Mem HI MED LO WX CALL BTUWRPDPCoSweSrcSaanver Scan PCriTvaCcSySCModeems MODE Channel Button 4. To exit All Hazards Radio, press and hold the Weather button until On or Off is displayed. CHANNEL VOLUME MEM ESC *National Oceanographic and Atmospheric Administration CALL TRI WATCH MODWE eather (WX) Alert Mode • STCuArNning On the Weather Alert function will allow your radio to automatically receive NOAA weather signals and warnings from designated weather broadcast stations. If the radio is turned ON, it will alert to Weather and other emergency alerts broadcast by NOAA. CHANNEL BURP Power Saver The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that VOLUME This feature is set to OFF by default. Make sure the strongest Weather channel is selected for your area using the channel selection in the previous menu. channel/privacy code for 10 seconds. During scanning (while receiving an incoming transmission), you can choose from the following: a. Press the Mode/Power button to enter the new setting and CALL proceed to other functions. b. Press Talk or Call/Lock button to enter the new setting and return to Standby mode. c. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode. VOLUME Weather Button MODE MEM ESC TRI WATCH SCAN Channel Button CHANNEL CALL MODE To turn Weather Alert On or Off: 1. Press the Weather button to enter the All Hazards (Weather) radio mode. 2. Press the Weather button again and the Weather Alert icon flashes on the display. The current On or Off setting is displayed. 3. Press the Channel Up and Channel Down button to turn Weather Alert On or Off. 4. Press the Weather button again to save the new setting. 18 Nothing Comes Close to a Cobra® 19