Cobra CXT 1035R FLT CXT 1035R FLT - Page 7

CHANNEL VOLUME Operation Mode Functions Set DCS Privacy Codes • Mode/Power CALL Vox MODE HI MED LO WX To select a DCS privacy code: 1. After selecting a channel, press the Mode/Power button until the DCS icon appears and the small numbers flash on the display (01 through 83). TW DCS Scan DCSCPTrCivSaScMy Cemode If CTCSS is turned on at the channel selected, the display will flash the DCS icon and "OFF." To switch from CTCSS to MEM ESC TRI WATCH SCAN BURP PoCwhaennreSl Bauvtteonr DCS, press the Channel Up or Channel Down button while the display is flashing "OFF." The display will then show the small numbers flashing and you will then be able to proceed to step 2. CHANNEL VOLUME CALL 2. Press using the Channel Up or Channel Down button to select a DCS MODEprivacy code. You can hold the Up or Down button for fast advance. 3. When DCS privacy code is displayed, press the Mode/Power button to enter the new setting and proceed to other functions, or press Talk button to enter the new setting and return to Standby mode. VOLUME MEM ESC IntWroTAdRTuICHctionSCAN Operation Customer Assistance Warranty CHANNEL VOLUME Set High/Medium/Low (H-M-L) Power Button • Your radio can transmit selectively at 0.5, 1, or 2 watts of power Use the low power setting for short-range communications and use the high power setting for long-range communications. Mode/Power CALL MODE To toggle between H-M-L Power Modes: 1. Press the Mode/Power button until HI MED LO icon appears. MEM ESC TRI WATCH SCAN Channel Button 2. P ress using the Channel Up or Channel Down button to select between High/Medium/Low power. 3. When the desired power is selected, press the CHANNEL Mode/Power button to enter the new setting and proceed to other functions, or press Talk CALL Hi/Med/Lo Icon RX Vox MODE button to enter the new setting and return to Standby mode. HI MED LO WX Channel 8 through 14 only operates on Low power setting. TW DCS Scan CTCSS Mem BURP Power Saver 8 Nothing Comes Close to a Cobra® 9