Cobra MRHH600 MRHH600W_ENG_MANL_vB.pdf - Page 12
Setup Mode Programming
![]() |
View all Cobra MRHH600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Main Icons Setup Mode Programming VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Customer Backlight Lamp Adjust Assistance Warranty The LCD has a Backlight lamp to make it visible in the dark. This lamp can be adjusted for brightness or turned Off. Menu Soft Key Installation To Adjust Customer Assistance The Backlight Level: Secondary Icons 1. Enter the Settings menu and scroll to LAMPADJUST with the Up/Down soft keys or using the Up/Down channel buttons. Channel Up/Down Buttons Notice 2. Press the ENTR soft key and observe the current backlight setting - HIGH, MEDIUM, LOW or OFF. 3.CUaustioen the Up/WDaroniwng n buttons or Right/Left soft keys to switch to the setting you want. 4. Press the ENTR soft key to select the backlight setting. Or press the EXIT soft key to EXIT without making changes to the backlight setting. L AMP ADJUST 2 MED EXIT ENTER 5. The radio will return to the Settings menu. The radio will remember the saved backlight setting, when powering off the radio, or disconnecting power to the radio. NOTE Setting the radio to a lower backlight setting will conserve battery power. Menu Soft Key LCD Contrast Adjust The LCD backlight will not be visible in daylight, but the LCD Contrast can be adjusted to make it easier to read in different light conditions. Channel Up/Down Buttons CONTRAST ADJUST 8 EXIT ENTER To Change The Contrast: 1. Enter the Settings menu and scroll to CONTRAST ADJUST Up/Down soft keys or the UP/Down channel buttons. 2. Press the ENTR soft key and observe the current contrast setting - a number between one 0 and 16. 3. Use the Up/Down buttons or the Right/Left soft keys to change the number up or down. 4. Press the ENTR soft key to select a contrast level. Or press the EXIT soft key to EXIT without making changes to the Contrast setting. 5. The radio will return to the settings menu. The radio will remember the saved contrast level, when powering off the radio, or disconnecting power to the radio. 18 English MRHH600_ENG_MANL.indd 18-19 Main Icons Setup Mode Programming VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Customer Confirmation Key ToneAssistance Warranty The Confirmation Tone sounds to confirm all button presses except for the Talk button. If you would prefer not to hear the Confirmation Tone, you can turn it Off and On as you choose. Menu Soft Key To Installation TurnCAsussTitsohtmaneecreConfirmation Tone On Or Off: Secondary Icons 1. Enter the Settings menu and scroll to KEYTONE with the Up/Down soft keys or the Up/Down channel buttons. Channel Up/Down Buttons 2. Press the ENTR soft key and observe the current confirmation Notice tone sCeautttioinng - OWNarnoinrg OFF. 3. Use the Up/Down soft keys or the Up/Down channel buttons to switch to the setting you want. ON OFF KEYTONE EXIT ENTER 4. Press the ENTR soft key to select the setting. Or press the EXIT soft key to EXIT without making changes to the Key Tone setting. 5. The radio will return to the settings menu. The radio will remember the saved Key Tone setting, when powering off the radio, or disconnecting power to the radio. U.S.A./International/Canada Channel Maps Three (3) sets of VHF Channel Maps have been established for marine use in the U.S.A., Canada, and the rest of the world (International). Most of the channels are the same for all three (3) maps, but there are definite differences (see table on pages 68 through 83). Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose. Menu Soft Key To Set Your Radio For The Area In Which You Will Be Using It: Channel Up/Down Buttons 1. Enter the Settings menu and scroll to CHANNEL MODE with the Up/Down soft keys or the Up/Down channel buttons. 2. Press the ENTR soft key and observe the current channel mode setting - USA,INTERNATIONAL, or CANADA. 3. Use the Up/Down soft keys or the Up/Down channel buttons to switch to the setting you want. 4. Press the ENTR soft key to select the setting. Or press the EXIT soft key to EXIT without making changes to the Channel Map MENU setting. D SC SETUP ME NU 5. T he radio will return to the settings menu. The radio will LAMP ADJUST CONTRAST ADJUST remember the saved Channel Map setting, when powering off KEY TONE UIC CHANNEL MODE the radio, or disconnecting power to the radio. TIME ADJUST EXIT ENTER Nothing Comes Close to a Cobra® 19 4/3/17 5:03 PM
![](/manual_guide/products/cobra-mr-hh600w-mrhh600wengmanlvbpdf-5cd5c40/12.png)