Cobra MRHH600 MRHH600W_ENG_MANL_vB.pdf - Page 15

Main Icons Setup Mode Programming VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Menu Soft Key Operation Customer Warranty SAsasisttaenclelite Based Augmentation (SBAS) The SBAS can be turned ON or OFF. Some areas of the earth need it turned off for greater accuracy. It is set ON by default. Installation To Select Customer Assistance the Satellite Based Augmentation System: Channel Up/Down Buttons Secondary Icons 1. Enter the Settings menu and scroll to GPS with the Up/Down soft keys or the Up/Down channel buttons. 2. Highlight the SBAS option in the menu. 3. Press the ENTER key and observe the current setting. Notice 4.CaUutisone the UpW/arDninogwn soft keys or the Up/Down buttons to SAT BASED AUG SYSTE M select the desired setting. ON OF F 5. Press the ENTER soft key to select the setting. Or press the EXIT soft key to EXIT without making changes to the Sat Based Aug Sys setting. E XIT ENTER Menu Soft Key GPS Status This screen allows you to test the GPS receiver to be sure it is receiving good satellite information and GPS signal strength. Channel Up/Down Buttons To Select the GPS Status Screen: 1. Enter the Settings menu and scroll to GPS with the Up/Down soft keys or the Up/Down channel buttons. 2. Highlight the GPS STATUS option in the menu. 3. Press the ENTER key and observe the current setting. GPS 4. The GPS Status screen reports the following information: COO RDINATE SYST EM a. How many satellites are currently being tracked. TRUE/MAGNETIC SBAS b. The overall health of the GPS satellite signals being GSPPESES DTAMTEUASSURE MENT received. COUR SE UP/NORTH UP EXIT ENTER 5. Press the EXIT soft key to EXIT the GPS Status screen. 6. The radio will return to the GPS menu. 24 English MRHH600_ENG_MANL.indd 24-25 Main Icons Setup Mode Programming VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Menu Soft Key Operation Customer Warranty Speed Assistance Measurement Units Select KNOTS, MPH or KM/H to change if speed is indicated in either nautical miles per hour, miles per hour or kilometers per hour. Installation Channel Up/Down Buttons Secondary Icons Customer TAossisStaencleect Speed Measurement Units: 1. Enter the Settings menu and scroll to GPS with the Up/Down soft keys or the Up/Down channel buttons. 2. Highlight the SPEED MEASUREMENT option in the menu. 3. Press the ENTER key and observe the current setting. Notice 4.CauUtiosne the UWpa/rnDingown soft keys or the Up/Down channel COO RDINATE SGYPSST EM buttons to select the desired setting. TRUE /MA GNETIC 5. Press the ENTER soft key to select the setting. Or press the SBAS GPS S TATUS EXIT soft key to EXIT without making any changes to the SCPOEUER DSME UEAPS/NUORERM THENUTP Speed Measurement setting. EXIT ENTER 6. The radio will return to the GPS menu. The radio will remember the Speed Measurement setting when powering off the radio. Menu Soft Key Course Up or North Up Option Channel Up/Down Buttons This allows selecting either COURSE UP or North Up. This change the orientation of compass and navigation screens. With NORTH UP selected then North will always appear at the top of those screens. With COURSE UP selected then the direction of travel appears at the top of the screen. To Course Up or North Up Option:: 1. Enter the Settings menu and scroll to GPS with the Up/Down soft keys or the Up/Down channel buttons. GPS 2. Highlight the COURSE UP/NORTH UP option in the menu. COORDINATE SYSTEM TRUE /MA GNETIC 3. Press the ENTER key and observe the current setting. SGBPASSS TAT US 4. Use the Up/Down soft keys or the Up/Down channel SPEE D MEASUREM ENT buttons to select the desired setting. COURSE UP/NORTH UP EXIT ENTER 5. Press the ENTER soft key to select the setting. Or press the EXIT soft key to EXIT without making any changes to the Speed Measurement setting. 6. The radio will return to the GPS menu. The radio will remember the Course Up or North Up setting when powering off the radio. Nothing Comes Close to a Cobra® 25 4/3/17 5:03 PM