Cobra MRHH600 MRHH600W_ENG_MANL_vB.pdf - Page 21

Main Icons Advanced Operation VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Customer Memory Channels Assistance Warranty You can program (or tag) any or all channels to be scanned in the Memory Scan mode. Channel Up/Down Buttons Installation Secondary Icons TCAosussPitsotrmaonecrge ram Memory Channels: 1. From Standby mode, select a channel to be tagged using the Up/Down buttons. 2. Press the MORE soft key (if necessary), then the MEM soft key. The channel will be tagged for scanning and Chann el Select N o tice CtMahuaEtiotMnch(manenmeWolarrinsyinsgcehlaencnteedl). will appear on the LCD whenever Repeat steps 1 through 2 to add addition memory channels.  To Clear Memory Channels: More Soft Key 1. Simply reverse the steps above. MEM (Memory Channel) will no longer appear on the LCD whenever that channel is selected. Memory Scan  During Memory Scan, the radio will rapidly switch from tagged channel to tagged channel. Whenever any activity is detected, the radio will stop the scan to allow you to listen to the activity USA 1W MEM TIME: 10:00 UTC on that channel. The radio will then continue to scan after 2 seconds of inactivity, unless you switch out of the Memory Scan DATE: 06/01 41° 54.523N 087° 47.192W A COMML mode. MEM COMP MARK MORE Scanning with Priority Channel Off Scanning with Priority Channel On 88 30 75 60 16 88 75 8830 60 75 15 30 60 14 88 88 36 English MRHH600_ENG_MANL.indd 36-37 14 68 69 79A 78A 71 72 Main Icons VOHpFerMatainrigneYoRuardRioaPdirootocols Intro Operation Standby Mode Installation Advanced Operation Customer Assistance Warranty NOTE Memory channels must be programmed to use memory Scan. The radio will enter standard Scan Mode if no Customer Assistance memory Channels are programmed. Secondary Icons NOTE The radio must be squelched for the Memory Scan mode to function. See page 16 for squelch procedure. Memory Scan Notice 68 US A 1W MEM TIME : 1 0:00 UTC D41A°T5 E4: 0.56 2/30N1 MEM SCAN 087° 47.192W TW H/M/L SCAN MORE ToCaEutnionter MemWaornrinyg Scan: From Standby mode, press the MORE soft key (if necessary), then the SCAN soft key. The radio will immediately begin to scan the channels you tagged. MEM SCAN will be highlighted on the LCD. The radio will then continue to scan after 2 seconds of inactivity, unless you switch out of the Memory Scan mode. To exit Memory Scan, press the SCAN soft key or Talk Button. This will return the radio to Standby mode on the last selected channel. Nothing Comes Close to a Cobra® 37 4/3/17 5:03 PM