Cobra MRHH600 MRHH600W_ENG_MANL_vB.pdf - Page 7
Wrist Strap and Belt Clip, Install/Remove Antenna
View all Cobra MRHH600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Intro Operation Customer Assistance Warranty Install/Remove Antenna VInHsFtaMllaatriionne Radio Protocols Install/RemInostavllaetionAntCAesussnitsotmannecrae • Secondary Icons Antenna 1. To install the antenna turn the antenna into the radio clockwise to tighten. Do not overtighten. Main Icons 2. To remove the antenna turn the antenna counterclockwise. Notice ThCaisutiornadio traWnasrnmingitter IC: 906A-MRHH600 has been approved by Industry Canada to operate with the supplied antenna. Other antennas are strictly prohibited for use with this device. Cet émetteur radio IC: 906A-MRHH600 a été approuvé par Intro Operation Customer WInardrauntsy trie Canada pour fonctionner avec l'antenne fournie. Assistance D'autres antennes sont strictement interdits pour une utilisation avec cet appareil. Batteries Installation and Charger Customer Assistance The radio is shipped with a sealed lithium-ion (LiON) battery • pack SecondaLryiOIcoNnsBattery Pack (P/N CM 110-034) that is rechargeable. WARNING The charger provided for this radio is only to be used to charge the battery pack provided. Do not charge any Notice Caution Warning other type of batteries in the charger as fire, explosion or battery damage may occur. Avoiding extreme temperatures will also help prolong the life of the battery pack for the radio. The device operating voltage is DC Install Battery Pack 6.29V - DC 8.40V. When your rechargeable batteries begin to discharge too quickly, it is time to install a new battery pack. Your radio will also operate with five (5) high-quality AA alkaline batteries, using the included alkaline battery tray. Tighten Screw Installing the Battery Pack 1. Position the battery pack over the back of the radio. 2. Engage the battery pack into the radio until battery pack is fully seated into the radio housing. 3. Tighten the screws using a coin or flat object to secure the battery pack to the radio. Do not overtighten. 8 English MRHH600_ENG_MANL.indd 8-9 Intro Operation Customer Assistance Warranty Wrist Strap and Belt Clip VInHsFtaMllaatriionne Radio Protocols Wrist Installation Strap and Customer BelAtssisCtanlciep • Secondary Icons Belt Clip Use the spring-loaded belt clip to carry the radio on your person. 1. Slide the belt clip into the guide channel on the back of the radio until it is locked in place. Notice 2.CTauotioanttach thWearnwingrist strap, insert it through the hole at the top of the belt clip, feed it through the looped end and pull tight to secure to the belt clip. Insert Belt Clip onto Radio 3. Press open the belt clip, slide it over the belt and release the clip. 4. To remove the belt clip from the radio press the tab on the belt clip, which unlocks the clip, and slide it out. Wrist Strap Attachment Secure Radio MARINE HH600 DSC+GPS 16 USA 6W TIME:10:00 LOC DATE:06/30 A 32 49.800N 999.11.077W EMERGENCY SOG: 3.7 KTS COG: 015 M MENU WX CALL MORE MOB SQL 16+ HML Nothing Comes Close to a Cobra® 9 4/3/17 5:03 PM