Cobra XRS 9570 XRS 9570 Manual - Page 10

Your Detector Settings VG-2 and Spectre I & IV+ Alert Settings Police use radar detector detectors (RDDs) to spot users of radar detectors. Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+ RDDs and can provide alerts when any of these or similar devices are in use near your vehicle. Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+ alerts is Off. Spectre I & IV+ Spectre I & IV+ and VG-2 On and VG-2 Off Spectre Spectre Dim Button Press and hold for four seconds & VG2 On & VG2 Off To Turn VG-2 and Spectre I & IV+ Alerts On and Off While no signal is being detected, press and hold the Dim button for four seconds. Tone On = Two Beeps Off = One Beep Voice Visual Display Spectre VG-2 Spectre & VG2 On blinks On in the display Spectre VG-2 Spectre & VG2 Off blinks Off in the display Radar Alert Settings The detector allows you to choose whether it will show alerts on the X, K, and Ku Bands. The factory settings are: X Band and K Band On; Ku Band Off. To Turn X Band On and Off While no signal is being detected, press and hold both the Dim and Mute buttons for four seconds. Tone X On = Two beeps X Off = One beep Voice X On X Off Visual Display X On blinks in the display X Off blinks in the display 14 English Your Detector Settings Radar Alert Settings (continued) To Turn K Band On and Off While no signal is being detected, press and hold both the Mute and City buttons for four seconds. Tone K On = Two beeps K Off = One beep Voice K On K Off To Turn Ku Band* On and Off While no signal is being detected, press and hold the City button for four seconds. Tone Ku On = Two beeps Ku Off = One beep Voice Ku On Ku Off Visual Display K On blinks in the display K Off blinks in the display Visual Display Ku On blinks in the display Ku Off blinks in the display Pop Alert The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single, short-time pulse to measure the target vehicle's speed. The Pop mode receiver senses Pop singles beyond the effective range of Pop radar guns. As the Pop mode receiver is so sensitive, you should limit the use of Pop Detect mode to highway and rural driving. Pop Alert will alert you to Pop radar signals. During the alert, the unit continues to detect other signals. The factory setting is Pop Detect Off. To Turn Pop Alert On and Off While no signal is being detected, press and hold both the Dim and City buttons for four seconds. Tone Voice Pop On = Two beeps Pop On Pop Off = One beep Pop Off Visual Display Pop On blinks in the display Pop Off blinks in the display Nothing Comes Close to a Cobra® 15