Cobra XRS 9570 XRS 9570 Manual - Page 7

Your Detector Settings Muting an Alert Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button. If you press the Mute button a second time during the Alert, the audio Alert will be turned back On. Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after four seconds for as long as the signal is detected. The factory setting is Auto Mute On. Mute Button Press and release To Turn Auto Mute On Press and release the Mute button again while no alert is occurring. Tone Two beeps To Turn Auto Mute Off Press and release the Mute button while no alert is occurring. Tone One beep Voice Auto Mute On Visual Display None, after Auto Mute On blinks Voice Auto Mute Off Visual Display None, after Auto Mute Off blinks 8 English Your Detector Settings IntelliMute IntelliMute is a unique feature that allows you to avoid alerts you don't need to hear because you are stopped or moving slowly. By sensing the "revs"(RPMs) of your engine, IntelliMute knows when you are at low speed and automatically mutes alerts. Before IntelliMute will work, you must set an activation point for your engine's revs (see page 10). Whenever the revs are below that point, IntelliMute will begin muting. The activation point will be stored in memory and recalled each time the power is turned On. The factory setting is IntelliMute Off. NOTE IntelliMute may not work with some vehicles because it cannot sense the engine's revs. In such cases, you can reduce unwanted audio alerts by using Auto Mute and City mode when appropriate. IntelliMute Button Press and release IntelliMute On i h To Turn IntelliMute On Press and release the IntelliMute button. Tone Two beeps To Turn IntelliMute Off Press and release the IntelliMute button again. Tone One beep Voice IntelliMute On Visual Display IntelliMute On blinks, then i appears in the display Voice IntelliMute Off Visual Display None, after IntelliMute Off blinks Nothing Comes Close to a Cobra® 9