Cobra XRS 9645 XRS9645_MANL - Page 14

Your Detector Settings Intro Operation Customer SmartPower Assistance Warranty Your detector includes the SmartPower feature that, when activated, will put the unit into Standby mode (low power) for about 30 minutes after the car's engine has been turned Off. After 30 minutes in Standby mode, the unit will SecondaaryuIctonosmatically turn Off. SmartPower Entering Standby Mode Pwr Save Notice Before SmartPower enters Standby mode, you will hear one beep and Pwr Save will appear on the display. To return the unit to normal Power mode or exit Standby mode, start the car, press any button or turn the unit Off and then On again. The factory setting is SmartPower On. To Turn SmartPower Mode On or Off Using Program Mode (See Page 7 For Instructions on Using Program Mode) In Program mode, go to SmartPower. Tone Two beeps Visual Display SmartPower On One beep SmartPower Off SmartPower On SmartPower Off ...Power On ...Power Off 22 English Your Detector Settings Intro Operation Customer Warranty DigiView DataAssiDstanicse play Brightness Your detector has a Bright display mode (for daytime driving) and three levels of Dim display modes (Dim for dusk driving, Dimmer for night driving and Dark where no visual alerts will be displayed) to control the display's SecondbaryrIicgonhs tness levels. The factory setting is Bright. The factory Dim mode default setting is Dimmer. Dark Indicator . Notice Main Icons Select/Dim Button Press and release To Change the Brightness to Dim Press and release the Tone Intro OpeSraetiolnect/DACisumssitsotmabnecrue ttonWoarnranctye. Two beeps Visual Display Dim, Dimmer or Dark Dim Display Dimmer Display Dark Display Secondary Icons Dim Dimmer Dark NOTE When you change to Dim mode, the unit will enter Notice whichever dim default mode is set at the time. To Change the Brightness to Bright Press and release the Tone Select/Dim button again. One beep Bright Display Bright Visual Display Bright Nothing Comes Close to a Cobra® 23