Cobra XRS 9645 XRS9645_MANL - Page 5

Your Detector Installation Intro Operation Customer Assistance Dashboard Mounting Warranty Secondary Icons Notice 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hookand-loop fastener. 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. 5. Plug the power cord into the detector. 6. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 English Your Detector Getting Started Intro Operation Customer Warranty Getting Started Assistance • Secondary Icons On-Off/ Volume Control Rotate clockwise (away from you) Main Icons Notice To Turn On the Unit and Adjust the Audio Volume Rotate the On-Off/ Volume control clockwise (away from you). Tone Three beeps Visual Display Testing System Ready The display will then cycle through the user mode settings (city or highway, Intellimute and SmartPower status). Start-up is complete when the display shows - - h. Important: Once the compass is calibrated, the dashes will change to one of the cardinal compass directions (N, NE, E, SE, S, SW, W, NW). See page 17 to calibrate the compass. Intro OpPeroatiwoner OnCustomer WarrantSy tart-Up Complete Assistance Testing __ h Secondary Icons System Ready NOTE In some vehicles, power is supplied to the cigarette lighter even Notice while the ignition is Off. If this is the case with your vehicle and you have turned the SmartPower Off, you should turn Off or unplug your detector when parking for lengthy periods. Cobra recommends leaving SmartPower at the factory setting, which is On. Nothing Comes Close to a Cobra® 5