Compaq 6000 Desktop Management Guide - Page 17
This hot-key enters the Intel Management Engine BIOS Execution MEBx setup utility. This utility allows
UPC - 894582579463
View all Compaq 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NOTE: If you do not press Ctrl+P at the appropriate time, you must restart the computer and again press Ctrl+P before the computer boots to the operating system to access the utility. This hot-key enters the Intel Management Engine BIOS Execution (MEBx) setup utility. This utility allows the user to configure various aspects of the management technology. Some of the configuration options are listed below: ● Main Menu ◦ Intel ® ME Configuration ◦ Intel ® AMT Configuration ◦ Change Intel ® ME Password ◦ Exit ● Intel ® ME Platform Configuration ◦ Intel ® ME State Control (enable/disable) ◦ Intel ® ME Firmware Local Update (enable/disable) ◦ Intel ® ME Features Control ◦ Intel ® ME Power Control ● Intel ® AMT Configuration ◦ Host Name ◦ TCP/IP ◦ Provision Model (Enterprise, SMB) ◦ Setup and Configuration ◦ Un-Provision ◦ SOL/IDE-R (enable/disable) ◦ Password Policy ◦ Secure Firmware Update (enable/disable) ◦ Set PRTC ◦ Idle Timeout ● Change Intel ® ME Password (HP highly recommends that this password be changed. The default password is admin.) In order to remotely manage AMT systems, the administrator must use a remote console that supports AMT. Enterprise management consoles are available from suppliers such as HP, Altiris and Microsoft SMS. In SMB mode, the client provides a Web browser interface. To access this feature, open a browser from any other system on the network and enter http://host_name:16992 where host_name is the name assigned to the system. Alternatively, the IP address may be used in place of the host name. To configure systems with a Broadcom DASH capable NIC: ENWW Configuring the Intel Management Engine 11