Compaq 6720t HP 6720t Mobile Thin Client Administrator Reference Guide - Windo - Page 40
Setting power options, Using power-saving states, Initiating and exiting Standby
View all Compaq 6720t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press ctrl+alt+delete. Then, click Shut Down > Turn Off. ● Press and hold the power button for at least 5 seconds. ● Disconnect the computer from external power and remove the battery. Setting power options Using power-saving states The computer has one power-saving state enabled at the factory: Standby. When Standby is initiated, the power lights blink and the screen clears. Your computer is disconnected from the network. CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Standby while reading from a disc or an external media card. NOTE: Hibernation is disabled at the factory. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in Standby. Initiating and exiting Standby NOTE: Power settings and timeouts can be changed in Power Options. With the computer on, you can initiate Standby in any of the following ways: ● Press fn+f3. ● Click Start > Turn Off Computer > Stand By. If Stand by is not displayed, follow these steps: a. Click the down arrow. b. Select Stand by from the list. c. Click OK. To exit Standby: ▲ Press the power button. When the computer exits Standby, the power lights turn on and your work returns to the screen where you stopped working. NOTE: If you have set a password to be required when the computer exits Standby, you must enter your Windows password before your work will return to the screen. 30 Chapter 6 Power