Compaq Armada 110 Compaq Armada 110 and Compaq Evo N110 Maintenance and Servic - Page 109
Removing the Interior System Board Screws, Optical Drive Alignment Rail
![]() |
View all Compaq Armada 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Removal and Replacement Procedures 5. Remove the M2.5 × 5.5 screw 1 securing the optical drive alignment rail to the base enclosure (Figure 5-25). 6. Remove the two M2.5 × 5.5 screws 2 securing the system board to the base enclosure. 7. Remove the optical drive alignment rail 3. 8. Disconnect the microphone cable 4 from the system board. Figure 5-25: Removing the Interior System Board Screws, Optical Drive Alignment Rail, and Disconnecting the Microphone Cable Maintenance and Service Guide 5-41
![](/manual_guide/products/compaq-470012944-compaq-armada-110-compaq-evo-n110-maintenance-service-guide-286aff9/109.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–41
5. Remove the M2.5 × 5.5 screw
1
securing the optical drive
alignment rail to the base enclosure (Figure 5-25).
6. Remove the two M2.5 × 5.5 screws
2
securing the system
board to the base enclosure.
7. Remove the optical drive alignment rail
3
.
8. Disconnect the microphone cable
4
from the system board.
Figure 5–25: Removing the Interior System Board Screws,
Optical Drive Alignment Rail, and Disconnecting the
Microphone Cable