Compaq Armada 110 Compaq Armada 110 and Compaq Evo N110 Maintenance and Servic - Page 81
Removing the Optical Drive, to the right
![]() |
View all Compaq Armada 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Removal and Replacement Procedures 2. Remove the M2.5 × 4.5 screw that secures the optical drive to the heat sink 1 (Figure 5-8). 3. Push the back edge of the optical drive 2 to the right to disconnect it from the connector on the system board. 4. Slide the optical drive out of the base enclosure 3. Figure 5-8: Removing the Optical Drive Reverse the above procedure to install the optical drive. Maintenance and Service Guide 5-13
![](/manual_guide/products/compaq-470012944-compaq-armada-110-compaq-evo-n110-maintenance-service-guide-286aff9/81.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–13
2.
Remove the M2.5 × 4.5 screw that secures the optical drive to
the heat sink
1
(Figure 5-8).
3. Push the back edge of the optical drive
2
to the right to
disconnect it from the connector on the system board.
4. Slide the optical drive out of the base enclosure
3
.
Figure 5–8:
Removing the Optical Drive
Reverse the above procedure to install the optical drive.