Compaq Armada 110 Compaq Armada 110 and Compaq Evo N110 Maintenance and Servic - Page 88
Removing the Heat Sink, A thermal pad
View all Compaq Armada 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removal and Replacement Procedures 3. Lift the front edge of the heat sink and swing it up and back until the shield rests at a 45-degree angle 1 (Figure 5-13). 4. Pull the heat sink away from the base enclosure at a 45-degree angle 2 and remove it from the base enclosure. Figure 5-13: Removing the Heat Sink A thermal pad 3 is installed on the heat sink and makes contact with the processor. Any time the heat sink is removed, inspect the thermal pad for damage. 5-20 Maintenance and Service Guide
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
3. Lift the front edge of the heat sink and swing it up and back
until the shield rests at a 45-degree angle
1
(Figure 5-13).
4. Pull the heat sink away from the base enclosure at a
45-degree angle
2
and remove it from the base enclosure.
Figure 5–13: Removing the Heat Sink
A thermal pad
3
is installed on the heat sink and makes contact
with the processor. Any time the heat sink is removed, inspect the
thermal pad for damage.