Compaq Armada m700 Compaq Armada M700 Series of Personal Computers Maintenance - Page 53
Go to Command Mode, type, Change the Hang-up Delay S
View all Compaq Armada m700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Table 2-15 Continued Problem Modem does not connect at highest speed. Possible Cause Solution Line conditions in your area Have your telephone line checked or in the area you are calling by your local telephone service may not support the highest provider. connect speeds. Try dialing an alternate telephone number for the service you are using. Another device on your telephone line may be causing interference. Hang up an extension telephone and disconnect any other devices that may be using the same telephone line, then redial. The service or site called does not support 56K or supports an incompatible 56K implementation. An internal modem supports K56flex. To find an Internet service provider (ISP) that supports K56flex, go the Compaq Web site at www.compaq.com. There is noise on the telephone line. The 56K protocol of an internal modem will fall back to lower speeds if the telephone line is too noisy for a high-speed connection. Try using another telephone line. Change the Hang-up Delay S Register: 1. Select Start! Programs !Accessories! HyperTerminal. 2. Go to Command Mode, type ATS10=150, then press Enter. NOTE: This command causes the modem to take longer to disconnect even if there is no noise on the line. The telephone line does not The 56K protocol requires that the support 56K implementation. telephone line contain no more than one analog-to-digital conversion. Try connecting from an alternate site. 2-22 Troubleshooting