Compaq DC7600 Hardware Reference Guide - dc7600 CMT - Page 14
Changing from a Desktop to a Minitower Configuration - not power up
UPC - 882780682009
View all Compaq DC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Product Features Changing from a Desktop to a Minitower Configuration 1. If you have locked the Smart Cover Lock, restart the computer and enter Computer Setup to unlock the lock. 2. Turn off the computer properly through the operating system and turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. 3. Remove the computer access panel as described in the "Removing the Computer Access Panel" section. 4. Remove the front bezel as described in the "Removing the Front Bezel" section. 5. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays. 6. To release the drives from the 5.25-inch drive bay, press down on the short yellow drivelock as shown. While pressing the drivelock, pull the drives out of the drive bay. 1-10 Releasing the 5.25-inch Drives from the Drive Bays (Desktop) www.hp.com Hardware Reference Guide