Compaq DC7600 Hardware Reference Guide - dc7600 CMT - Page 16
Replace the front bezel and computer access panel., bottom, then snap it back into the bezel.
UPC - 882780682009
View all Compaq DC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Product Features 10. Remove the bezel subpanel as described in the "Removing Bezel Blanks" section. Ä CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. 11. Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration. 12. Reposition the subpanel (rotate it 90°) with the logo at the bottom, then snap it back into the bezel. Changing from a Desktop to a Minitower Configuration 13. Replace the front bezel and computer access panel. 14. Reconnect the external equipment. 15. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. 1-12 www.hp.com Hardware Reference Guide