Compaq DC7600 Hardware Reference Guide - dc7600 CMT - Page 45

Replace the computer access panel., CD for instructions about using Computer Setup.

Get Compaq DC7600 - HP PDF manuals and user guides
UPC - 882780682009
View all Compaq DC7600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Hardware Upgrades 5. Connect the power cable 1 and data cable 2 to the hard drive. Connecting the Power Cable and Data Cable to a SATA Hard Drive 6. Connect the opposite end of the data cable to the appropriate system board connector. ✎ If your system has only one SATA hard drive, you must connect the hard drive to the connector labeled P60 SATA 0 first to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the system board connector labeled P61 SATA 1. 7. Replace the computer access panel. 8. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. 9. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for instructions about using Computer Setup. Hardware Reference Guide www.hp.com 2-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Hardware Reference Guide
www.hp.com
2–29
Hardware Upgrades
5. Connect the power cable
1
and data cable
2
to the hard drive.
Connecting the Power Cable and Data Cable to a SATA Hard Drive
6. Connect the opposite end of the data cable to the appropriate
system board connector.
✎
If your system has only one SATA hard drive, you must connect the
hard drive to the connector labeled P60 SATA 0 first to avoid any hard
drive performance problems. If you are adding a second hard drive,
connect the data cable to the system board connector labeled P61
SATA 1.
7. Replace the computer access panel.
8. If you normally lock the Smart Cover Lock, use Computer Setup
to relock the lock and enable the Smart Cover Sensor.
9. Reconfigure the computer, if necessary. Refer to the
Computer
Setup (F10) Utility
Guide
on the
Documentation and Diagnostics
CD for instructions about using Computer Setup.