Compaq DL320 Deployment Guide - Page 5

Deploying Compaq ProLiant DL320 and DL360 Servers into Third-Party Racks 5 Compaq Third-Party Rack Option Kit The Compaq Third-Party Rack Option Kit for ProLiant DL320 and ProLiant DL360 servers provides a complete mounting solution that adapts to a variety of third-party racks. The Compaq Third-Party Rack Option Kit includes a set of adjustable rack rails that attach to third-party rack posts using customer-supplied fasteners appropriate for the rack. Compaq supplies adapter washers for M5 and 10-32 thread mounting screws. The depth-adjustable rack rails mate to the rails preinstalled on the ProLiant DL320 and ProLiant DL360 servers for slide-in installation. The Compaq Third-Party Rack Option Kit includes a cable management tray option. A minimum rack depth of 28 inches is required to use the cable management tray. The Compaq Third-Party Rack Option Kit comes with a detailed installation guide. Consult this installation guide for details on adapting to your particular third-party rack. 4 1 3 2 Figure 3: The ProLiant DL320 and ProLiant DL360 server Third-Party Rack Option Kit Table 1. Third--Party Rack Option Kit Item 1 2 3 4 Description Rack Rails Adapter Washer Cable Management Tray Installation Guide The ProLiant DL320 server includes a cable support bracket for use when installing the ProLiant DL320 with a Compaq Third-Party Rack Option Kit. Note: The Compaq Third-Party Rack Option Kit is for fixed rail installation. Although the ProLiant DL320 and ProLiant DL360 servers slide in for installation, remove the server from the rack for service. 13NT-1000A-WWEN