Compaq DL320 Deployment Guide - Page 9

Deploying Compaq ProLiant DL320 and DL360 Servers into Third-Party Racks 9 Dimensions Compaq designed the Compaq Third-Party Rack Option Kit to comply with EIA 310-D specifications for rack width. Table 3 lists the dimensions for installing ProLiant DL320 and ProLiant DL360 servers using the Compaq Third-Party Rack Option Kit. 1 2 3 4 5 Figure 5: Dimension requirements for the Compaq Third-Party Rack Option Kit Table 3. Space requirements ProLiant DL320 ProLiant DL360 1 Height 1.75 in (1U) 1.75 in (1U) 2 Width (with no rails) Width (with rails) 16.75 in 17.72 in 16.75 in 17.72 in 3 Minimum depth 22 in 25 in 4 Minimum depth with cable management tray 28 in 28 in 5 Maximum depth adjustment 33 in 33 in 6 Maximum depth with cable management tray 33 in 33 in Note: When creating deployments of ultra-dense servers in third-party racks, include the minimum clearances for installation of the server, rack rails and cables. IMPORTANT: Compaq products are designed to provide airflow from the front of the rack to the rear. It is recommended that rack components only be installed on the front rails for many reasons, including proper airflow. 13NT-1000A-WWEN