Compaq DL320 Deployment Guide - Page 7

Deploying Compaq ProLiant DL320 and DL360 Servers into Third-Party Racks 7 Table 2 lists the weights of individual components used in deployments of ProLiant DL320 and ProLiant DL360 servers in third-party racks. Table 2. Component weights for calculation Item Configured (1 server) Fully configured (42 servers) Wide Ultra3 hard disk drive Remote Insight Lights-Out Edition option Third-Party Rack Option Kit rack rails (set) Third-Party Rack Option Kit cable management tray KVM cable bundle High voltage Y power cable Server console switch Weight (ProLiant DL320) 25.00 lb 1,030 lb (approx) 1.90 lb 0.50 lb 2.50 lb 1.00 lb 1.42 lb 1.00 lb 5.25 lb Weight (ProLiant DL360) 29.00 lb 1,200 lb (approx) 1.90 lb 0.50 lb 2.50 lb 1.00 lb 1.42 lb 1.00 lb 5.25 lb WARNING: External cable weight contributes to the overall weight of the rack installation. Because cable installation and load-bearing designs vary greatly, carefully consider cable weight in all designs. WARNING: Do not exceed the specified weight limit for the third-party rack or the floor. When creating deployments of ProLiant DL320 or ProLiant DL360 ultra-dense servers in a thirdparty rack, include in the weight calculations the weight of the rack rails, cable management trays and cables that place a load on the rack. CAUTION: The cable management tray design reduces cable congestion and relieves strain on connectors. Ensure that the cabling design provides both adequate airspace for thermal dissipation and strain relief for the cable connections on the ProLiant DL360 or ProLiant DL320 server if the cable management tray is not used. 13NT-1000A-WWEN