Compaq Presario 1800 Presario Selct 1800 Series Maintenance and Service Guide - Page 19
Preliminary Steps - hard drive connection
View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Maintenance & Service Guide Presario 1800 Series Models: 1805 and 1810 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Preliminary Steps Before running POST, complete the following preliminary steps: 1. If a power-on password has been established, type the password and press the Enter key. If the password is not known, clear the password. 2. Run Computer Checkup. 3. Turn off the computer and its external devices. 4. Disconnect any external devices that you do not want to test. Do not disconnect the printer if you want to test it or use it to log error messages. If the problem only occurs when an external device is connected IMPORTANT: to the computer, the problem device or its cable. Verify this may be related to the by running POST with external and without the external device connected. 5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports. 6. Ensure the hard drive is installed in the computer. 7. Ensure that the battery pack is inserted in the computer and the computer is connected to an external AC power source. When the preliminary steps are completed, you are ready to run POST.