Compaq Presario 1800 Presario Selct 1800 Series Maintenance and Service Guide - Page 38

Service Considerations, Tool and Software Requirements, Screws

Get Compaq Presario 1800 - Notebook PC PDF manuals and user guides View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Maintenance & Service Guide Presario 1800 Series Models: 1805 and 1810 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Service Considerations Listed below are some of the considerations that you should keep in mind during the disassembly and assembly of the computer. Tool and Software Requirements To service the computer, you need the following: q Compaq screwdriver kit (Spare Part No. 161946-001) q Torx T-9 screwdriver q 5mm nut drivers (for screwlocks and standoffs) q Small, standard screwdriver q Small, Phillips screwdriver q Plastic shroud q Diagnostics software Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. As each subassembly is removed from the computer, it should be IMPORTANT: placed away from the work area to prevent damage. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
Service Considerations
Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
●
Compaq screwdriver kit (Spare Part No. 161946-001)
●
Torx T-9 screwdriver
●
5mm nut drivers (for screwlocks and standoffs)
●
Small, standard screwdriver
●
Small, Phillips screwdriver
●
Plastic shroud
●
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it should be
placed away from the work area to prevent damage.
Return to Removal & Replacement Procedures