Compaq Presario 1800 Presario Selct 1800 Series Maintenance and Service Guide - Page 60
Removing the Battery Charger Board
View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Maintenance & Service Guide Presario 1800 Series Models: 1805 and 1810 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Battery Charger Board Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Modem Processor Status Panel Interface Board Hard Drives Battery Charger Board CD or DVD Drive Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly Audio Board System Board Memory Module To remove the battery charger board, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the hard drive. 5. Remove the stiffener bracket. 6. Remove screw from the battery charger board, unplug the board from the connector on the system board, and lift out of the chassis. To replace the battery charger board, reverse the previous procedures. When replacing the battery charger board, ensure NOTE: the pins are aligned with the connector on the system board.